Re: [T3] ~35K engine teardown... suggestions?

[David Yaghoubian <goob@roadrunner.com>]

<x-flowed>At 05:42 PM 5/17/2011, you wrote:
> I might add to replace your valve guides and exaust valves now too, they are
> only good for 60-70K anyway.

Thanks for the tip. Exactly what I was looking for. :)

> If your cam looks good, don't be too hasty to
> tear the whole thing down... look into this farther, like a pulling head or
> rocker stud somewhere... you should be able to find the culprit with light
> digging.

When they pulled the #3/4 head to find out what bent the #3 exhaust 
pushrod they were expecting to find some obvious issue within the 
head/valve/seat but found nothing... hence the mystery. The clearance 
issues followed and continue, adding to the mystery. I'm going in 
tomorrow to go over everything again with them before making a 
decision so we'll definitely check the head(s) and rocker studs 
before going further. Thanks again,

Dave 

_______________________________________________
VWType3.Org mailing list - type3@vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm@vwtype3.org if you need help with the list.
</x-flowed>