Re: [T3] Lack of high beam and turn signals

["Jim Adney" <jadney@vwtype3.org>]

On 13 May 2011 at 18:53, Adriel Rowley wrote:

> Swapped the turn signal switch and it lights the high beam light all
> the time.  How do I correct this?  Other than that, does activate the
> relay but too bright to be sure the filiment is energized. 

I get the impression that you're trying to randomly do things that 
you think might fix the problem. This approach appears to be causing 
additional problems. 

Instead, use a voltmeter to trace the current path. Concentrate on 
exactly ONE problem at a time. Look at your '71 wiring diagram and 
follow the voltage from the source to the load. Verify that you have 
voltage at each step along the way. Remember that your headlight 
current flows thru the ignition switch, the fuse box, the headlight 
switch and the headlight relay. When you find the spot where the 
voltage no longer shows up, then you have to figure out why.

Note that the headlight voltage does NOT flow thru the TS switch. The 
TS switch only controls the hi/lo relay. No matter what's happening 
in the TS switch, the hi/lo relay should always be in one state or 
the other (hi or lo.)


-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

_______________________________________________
VWType3.Org mailing list - type3@vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm@vwtype3.org if you need help with the list.