Re: [T3] 110 cam and single springs

["Jim Adney" <jadney@vwtype3.org>]

On 12 May 2011 at 11:36, sploogemeister wrote:

> Stock, aluminum push rods work just fine, but if you need, the ends can
> be pulled and you can cut them to length. If you want some stock push
> rods with one end removed, email me off list. 

It's not even necessary to remove one end. If you have access to a 
lathe, just cut some of the alum off behind one steel end, then press 
the end on down into that shortened alum tube. I've done this many 
times, but Bill Fisher's book, "How To Hot Rod the VW Engine" gets 
the credit for this method. 

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

_______________________________________________
VWType3.Org mailing list - type3@vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm@vwtype3.org if you need help with the list.