Re: [T3] injector

[Bobsnotch@aol.com]

In a message dated 6/27/2011 4:26:00 P.M. Eastern Daylight Time,  
emailjohnmorgan@gmail.com writes:

What I  really need is to replace the hose.  I am assuming that I undo
the  two, 10mm bolts, and the come out together, according
to my Muir  book.
Can anyone offer any other advice?



Yes, take the two 10mm nuts off, then pull the 2 injectors as a pair. I use 
 a 1/4 drive ratchet, and a box-open 10mm  wrench to get them off.
 
Then just cut the metal piece off the injector. I cut it on a curve/angle.  
You can do it with a die grinder, or even a hack saw. I prefer power tools. 
;^)  

Bob 65 Notch  S with sunroof and IRS (Krusty)
71 Notch (Krunchy)
64 T-34 Ghia  (Wolfie)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110627/96a20313/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3@vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm@vwtype3.org if you need help with the list.