Re: [T3] 71-on windshield seal question

["Keith Park" <topnotch@nycap.rr.com>]

The opening never changed and the new windshields are all the same thickness
Don't use the clips if you had them but the thing to check is the length
between the moulding groove and the end of the outer lip... 7/8" is what you
want, the ones with 5/8" don't fit.

Keith


Top Notch Restorations
topnotch@nycap.rr.com 
http://www.a383ina68.addr.com/radiorest/main.htm
71 Squareback "Hothe"
65 Notchback "El Baja Rojo"
65 Squareback "Eggcrate"
87 golf "Winterat"
93 RX7 "Redstur"

-----Original Message-----
From: type3-vwtype3.org-bounces@lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces@lists.vwtype3.org] On Behalf Of Bryon
Garvin
Sent: Monday, February 07, 2011 7:27 PM
To: type3@vwtype3.org
Subject: [T3] 71-on windshield seal question

Would a 311-121B seal (from WCM) work in a 71 Type 3?  Label on box says
62-70, but I wasn't sure what happened in 71 as far as a change to the seal.
 Its got the groove.

Would this work in my '71 (production date 9/70) ?

Thanks,

 - Bryon
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110207
/6f8e5678/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3@vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm@vwtype3.org if you need help with the list.

_______________________________________________
VWType3.Org mailing list - type3@vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm@vwtype3.org if you need help with the list.