[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T3] CV concave washer

<x-flowed>Nice drawing.
I did a few CV's today, and that's how I did it. That's also how the Bugme video does it.
When you put the spring clip back on, I tapped a little with a 30mm socket to help get the clip into the groove in the shaft. 


-Brent

On 8/20/11 8:46 PM, Bryon Garvin wrote:

When reassembling a CV, should the concave washer bend outward toward the
center of the shaft?

|  C  |x
|  V  | x
|  J  |  x  ---------------
|  O  |  x   AXLE
|  I  |  x  ---------------
|  N  | x
|  T  |x

yes ?
(x's refer to the concave washer....hope the drawing came thru)

Thanks,

  - Bryon, '71 Fastback
-------------- next part --------------
An HTML attachment was scrubbed...
URL:<http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110820/a00933e5/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3@vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm@vwtype3.org if you need help with the list.


_______________________________________________
VWType3.Org mailing list - type3@vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm@vwtype3.org if you need help with the list.
</x-flowed>