Re: [T3] Mirror adhesive...

[Cybernotchback <cybernotchback@yahoo.com>]

________________________________
From: Jim Adney <jadney@vwtype3.org>
To: type3@vwtype3.org
Sent: Monday, August 15, 2011 11:18 PM
Subject: Re: [T3] Mirror adhesive...

From:Ê Frank Meek

> While I too thought that silicone was the best solution for this, three
> screwed up mirrors later have given me another opinion.Ê The silicone would
> be fine if it only touched the glass and not the silver surface that *is*the
> mirror.Ê It will take that coating off in about six months...or less.

>From Jim A
I had wondered about that possibility. Most silicone caulks release 
acetic acid as they cure, 
I'd also wondered if you could overspray the backside of the mirror 
with some kind of paint that might seal the reflecting coating. Did 
you try anything like that?

Concentrated acetic acid is used in photography as a "Fixer".Ê Here the acetic acidÊ has a dual role, it helps to neutralize the developer, and also washes off the unexposed and undeveloped silver particles from the film or paper.Ê So I'm not surprised that in Frank's case the silicone removed the silver from the glass. 

ÊJim's suggestion of coating the back side of the silver might work, but with other adhesives on the market I'd go for one specific for mirrors

Cheers,

John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110816/669a528a/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3@vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm@vwtype3.org if you need help with the list.