[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[T3] petronix and FI

<x-html><!x-stuff-for-pete base="" src="" id="0" charset="iso-8859-1/macintosh"><html>
<head>
<style>
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
FONT-SIZE: 10pt;
FONT-FAMILY:Tahoma
}
</style>
</head>
<body class='hmmessage'>
I use pertronix units it FI and Carb'ed T3's There're&nbsp;two&nbsp;really three versions Vacuum advance and two for mechanical advance. One of the leads will need to be lengthened if your coil is mounted on the fan schroud. The one time it failed it wasn't the unit, it was the extension&nbsp;wire that I had made-up. Make sure that your distributor drive is healthy. Stay away from the earlier,'bigger style' JC Whitney&nbsp;might still be&nbsp;unloading the earlier units. With the newer versions you don't need to remove the hold down clamp clips and screws. There're garanteed for 30 months. The one I replaced,&nbsp;is when I&nbsp;found the bad extension&nbsp;wire, seven years ago.&nbsp;&nbsp;</body>
</html>
</x-html>