[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 25 Sep 2006 at 13:17, Roush, Norman wrote: > It's the joint between the HE shroud and HE pipe. I need Item #15 in > this part explosion (thanks Dave Hall) > > http://www.hallvw.clara.net/type3/T3pbo/T3pb2-12.htm I've never seen that seal for sale other than on a heat exchanger. I'll look up the part # tonight and we can google for it. That's a difficult seal to make. If you use something that traps water it will cause the shroud to rust away extra fast, which would be counterproductive. I wonder if you could just use one of the usual muffler joint donuts and squeeze it down with your clamp. You'd have to cut the donut to let it expand a bit, but that should not create too big a leak. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~