[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
In a message dated 3/18/06 11:16:57 PM Eastern Standard Time,
ctobio@gmail.com writes:
<< From an old
>catalog I have here, the part number you want is 211 611 775 B (270 mm
long). I
>realize they list it for a swing axle bug, and a bus, but it's the shortest
hose
>with the correct ends on it. I hope this helps.
>
>
Ok, that hose is about 55mm longer than whats on there, and 5mm longer
than what I was going to put in there. I don't think that excess will
cause any interference problems, however. >>
Yeah, you can put kind of a "U" or "S" shaped bend in the hose, it'll fit. It
does get annoying that nobody offers the correct hose for this corner for our
cars. I've used the bus hose on a couple of them, but that was a few years
ago. Probably should do the Notch, as I know it's hoses are getting up there in
age (never did the rears on it :O ).
Bob 65 Notch S w/ Sunroof and IRS
71 Square, now a 2 seat Roadster, pics can be seen at;
http://volksrods.com/forums/index.php?showtopic=2977 and now has a 2.0L t-4 with D-jet FI
engine transplant, just finishing up the details. : )
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~