Re: [T3] Door Handles "window winder"

[BOB2TYPE3S@aol.com]

In a message dated 3/3/06 10:57:03 PM Eastern Standard Time, 
fisherfarms@uwol.net writes:

<< Yeah, window winder, not door handle!  My 67 Square has what looks like 
 slots for c-clips, but no c-clips.  Everett says no cross pins, so I guess 
 I'll have to "muscle" them with my Chanelock pliers.  Mike >>

Mike, I guess I should have mentioned the window winder handle too. :O  Yeah, 
67 should have a "C" clip similar to GM's, but the clip and slots are thinner 
so your GM clip tool won't work here. You could build a copy of one out of 
some thin banding metal (or some thin metal that you have laying around) that 
would work quite nicely. I did this for my own use, and it works great. If I 
remember correctly the clip is only about 1/32nd of an inch in diameter 
(sectional), so you see it's pretty thin. I hope this helps.

Bob 65 Notch S w/ Sunroof and IRS
       71 Square, now a 2 seat Roadster, pics can be seen at; 
http://volksrods.com/forums/index.php?showtopic=2977 and now has a 2.0L  t-4  with D-jet FI 
engine transplant, just finishing up the details. : )
       

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~