[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
In a message dated 3/3/06 3:14:51 PM Eastern Standard Time,
fisherfarms@uwol.net writes:
<< My door handles won't come off! I can see a groove for c-clips like
Chevys
have. I don't see any c-clips, so have prise with screwdriver as my
Autopress Manual suggests. I can get a good grip with Chanelocks, but just
wiggles! I'm not missing something less than obvious here am I??? Mike >>
For outside door handles; Look inside the door edge (Door side of the jamb)
and see if you see 2 phillips head screws. You want to remove the top one (the
bottom one gets the lock loose (up to 67).Once you get the screw out, slide
the handle to the front, and lift out.
For inide door handles; remove the plastic cover with a small screw driver,
prying at the front edge,and pop it out. Underneath is 1 or 2 screws (depending
on year) and remove them (it). Now you have access to the 2 10mm bolt headed
6mm screws that hold the handle to the door. I hope this helps.
Bob 65 Notch S w/ Sunroof and IRS
71 Square, now a 2 seat Roadster, pics can be seen at;
http://volksrods.com/forums/index.php?showtopic=2977 and now has a 2.0L t-4 with D-jet FI
engine transplant, just finishing up the details. : )
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~