[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
The uppers are VW771-21/11 the lowers VW771/10 And the threaded rod was vw771 Be real nice if you had some! Ive never found any in all these years. Keith Top Notch Restorations topnotch@nycap.rr.com 71 Squareback 65 Notchback "El Baja Rojo" 65 Squareback "Eggcrate" 87 golf "Winterat" 93 RX7 "Redstur" -----Original Message----- From: Russ Wolfe [mailto:russw@classicvw.org] Sent: Thursday, March 02, 2006 8:30 PM To: Type3 Subject: RE: [T3] My (redesigned) pulley lock. On Thu, 2006-03-02 at 19:07, Keith Park wrote: > Ya know what we REALLY need? The slotted washers used to pull the upper and > lower front end bushings. I could supply dimensions in the spring when I > harvest some beams but they would need to be made from hardened steel so > they wouldn't bend and cutting the slotted hole in them would be the fun > part. > What is the VW tool number on them? I might have some. I bought a bunch of them off Ebay cheap, because no one else knew what they were. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~