[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 20 Jun 2006 at 9:16, Jens Vagelpohl wrote: > > On 20 Jun 2006, at 05:01, Jim Adney wrote: > > > On 18 Jun 2006 at 12:09, Russ Wolfe wrote: > > > >> Not sure about the 311405305. That may be the inner bushing. > > > > I don't find that number in my P/L. It's not the number for either of > > the bushings. > > Is that a typo maybe? 311 401 305 shows up as needle roller bearing > (44 mm OD) for the upper trailing arm in my early parts book. 311 401 > 305 A is an oversized bearing with 44.2 mm OD. I'll bet you're right about the typo. That must be what happened. While looking at this I discovered something I had not realized before: The lower needle bearings were smaller (47 or 47.2mm) up thru VIN 127,587 (early MY '63.) After that the lower bearings were enlarged to 50 or 50.2mm. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~