[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
"Especially for gasohol and later carbureted vehicle applications with high under the hood temperatures. Hysunite hose cover is oil and gasoline resistant and withstands exposure to fuel, vapor, moisture and high heat up to 250deg.F. The Chemigum¨ rubber tube is specially compounded to resist gasoline, oil, diesel, and other fuels. High strength synthetic textile reinforcement brings minimum burst to 175 P.S.I. Meets SAE specification J30R7. (Warning -- For fuel injected vehicles, use SAE J30R9 Fuel Injection Hose.)" The burst pressure of 175PSI seems good enough for me. Considering that the pressure relief valve in the pump kicks in at 60 PSI (presuming it still works), it's fine. You want a 25' spool, Goodyear part number 65127. My favorite part of the Goodyear hose- it has a manufacture date printed all over the length of hose. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~