[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sat, 2006-06-03 at 09:14, Keith Park wrote: > I guess I really need to sit down with my Bentley and educate myself on > Trannies. They are my weak spot as far as working on the innards... I > suppose minute changes in dimensions of the new bearing vs. old one could > translate into bigger changes elsewhere. Of course actually pulling one of > these trannies apart would really help me too. > > I wonder if I could make the expensive case simulating fixture with an old > case and a Hammer? > A lot of independent tranny shops use an old tranny case and a sawzall to get access to the forks for adjustment. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~