[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 11 Jul 2006 at 19:24, knowonelse@sbcglobal.net wrote: > I know this has been discussed, and the consensus > seems to be to use the Gates 7395 fan belt. I went to > my FLAPS to get one and the size seems too long. > > From what I was able to find in the archives, the belt > should be 10mm x 1000mm, which is listed along with > the Gates 7395. The original size was 9.5 x 1000. If the Gates is slightly wider, then slightly longer would be appropriate. > Here are the various Gates numbers and their sizes: > > 7385 3/8 x 39 1/8 9.5mm/10mm x 995mm > 7390 3/8 x 39 5/8 9.5mm/10mm x 1005mm > 7395 3/8 x 40 1/2 9.5mm/10mm x 1020mm > > So, from my data taken from the belts, it appears that > the 7390 is closer to stock than the 7395. Sounds good to me, but I haven't used US sized belts. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~