[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Ive mentioned it because I really have had poor luck with it. If you really go at your floor to prep it and remove all the loose rust and MAKE SURE YOUR CAR STAYS DRY INSIDE it may be fine, it doenst require a topcoat but it really isn't the stuff to Paint OVER rust. The eastwood product performed better, but requires a topcoat. Its not the golden cure eather but surface prep is essential. Keith We got new tubes/used tires, so was able to drive our T3 down the street sitting on a milk crate. Jim says my seat rail guides are "ready to mail" so want to get my floorboards cleaned up. I was planning on wire brush/air drill, rust killer, spray-on undercoating from NAPA or am I supposed to use a paint? You guys have mentioned Por-15? Mike ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~