[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 3 Apr 2006 at 9:01, Chris Wright wrote: > The original lightswitch in my July64 T34 was a round one, not a square > aluminium one. The part number was the same as the one from the seller > in GY and the only difference was the rear section on the replacement > was bakalite instead of metal, obviously a different supplier. > The 'early' cars used the round ones similar to an early beetle and > later were the rectangular ones, I think it changed in around 65 as > there were some rectangular 6v ones I think. I guess that's what you > are looking for. All 12v are similar looking rectangular ones but with > a different rheostat value for dimming so not really interchageable. >Good point about the rheostat value. I'll make sure to check that and make >sure >that the one I have is different from the newer 12V ones I have here. Do you >know the ohm values of each off hand? If it helps the unit that I have is a 6 volt (65) I have changed to 12 volt but this shouldn't be an issue. I just want it to look as stock as possible. If it helps I can post photos. -- John 65 square (weezer) 04 jetta Just Cruisin By ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~