[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 13 Sep 2005 at 22:10, David Y wrote: > I took these photos of the side of the installed oil cooler/seal using a > small pen mirror. Does this look like the proper gap/seal? > > http://dcr.csusb.edu/dny/oil_cooler_seal_installed.jpg > > http://dcr.csusb.edu/dny/oil_cooler_seal_installed-2.jpg It's really hard to tell, but IF this is a '68 case AND cooler, then I don't think this is done right. The '68 case would be a single oil pressure relief case. The '68 cooler has no part # stamped on top next to the oil pressure switch. If these describe your parts, then you should have a gap of more than 1/8" between the case and cooler. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~