[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] 009 timing (how many lobes is 32 degrees?)


On Sun, 2005-09-11 at 19:23, David Y wrote:
> Hi again,
> 
> I have my 009 timed at 7.5 btdc (w/ Pertronix, which is at 55 dwell).
> First, is 7.5 btdc the correct setting (running dual carbs...
> essentially a '67 Solex setup)? Second, since the advance is the
> critical concern (not to exceed 32 degrees total advance, correct?)
> does anyone know how many lobes to count off to make a mark at 32
> degrees, or another slick way of locating the spot to mark it? 
> 
> Thanks again!
> 
The procedure for checking it is in this document.
http://classicvw.org/gallery/IgnitionManual?page=1

-- 
Russ Wolfe
'71 FB AT
'66 FB MT
'64 T34 (not running)
'65 T1 (not running)
'05 KIA Sorento SUV
russw@classicvw.org
http://www.classicvw.org

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]