[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T-3] Pilot bearing?


On Mon, 2005-09-05 at 09:38, Jim Adney wrote:
> On 4 Sep 2005 at 21:09, ibjack wrote:
> 
> > I could shift into all gears without pushing in the clutch while the engine 
> > was running.  I'm in deep when Jim and Russ have no idea what the problem 
> > could be   :(
> 
> Are you able to then drive the car?
> 
> I'm wondering if the tranny drive input shaft has become disconnected.... ;(

that is what I tried to explain earlier. that the snap ring holding the
reverse drive gear has come off and that gear has slide back. That is
also the sleeve that connects the input shaft to the main shaft in the
tranny.

-- 
Russ Wolfe
'71 FB AT
'66 FB MT
'64 T34 (not running)
'65 T1 (not running)
'05 KIA Sorento SUV
russw@classicvw.org
http://www.classicvw.org

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]