[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
There is (4) places to grease the front axle. Bentley shows (2) of these on page 5-13. If you're missing a fitting or somebody has substituted a plug, I'd get fittings in there. I grease mine every oil change (3000 miles). Daryl - 72SB ----- Original Message ----- From: "Carrie" <apop@eradain.com> To: "'Type3'" <type3@vwtype3.org> Sent: Tuesday, May 31, 2005 2:52 PM Subject: [T3] Painting Front Beam > > I'm waiting for my order of POR-15 for the front beam on my 63 notch (on a > late pan). Any advice on which bits to omit? Should I or should I not pull > out the torsion arms or just include those as well? It's going to be a > brush job so no danger of painting something I don't need to. > > Also, I have two grease nipples/fittings on the top side of the beam, and a > nice threaded hole in one spot on the lower. Am I missing a grease fitting? > > Thanks, > Carrie > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >