Re: [T3] Measuring fuel pressure -- hose size and fitting?

[Russ Wolfe <russw@classicvw.org>]

On Sat, 2005-05-21 at 12:46, Constantino Tobio wrote:
> Toby Erkson wrote:
> 
> > I bought a pressure gauge (0-60psi, +/- 3%/2%/3%) and gotta get the
> > right hose and fittings for it so I can check fuel pressure.  The
> > Bentley wasn't clear on how to attach the fuel pressure tester.  After
> > removing the cap (bolt?) does the gauge hose screw on to the fuel line
> > tap or does it require a hose clamp to keep the hose attached?  And
> > what size hose should I use?  Any additional info would be
> > appreciated.  Thanks!
> >
> I was figuring going to my local Grainger to pick up a 60psi fluid
> pressure guage. Would that be sufficient? Any recommendations/specs to
> look for?
> 
Air pressure gages work fine for what we are doing. Doesn't need to be
anything fancy.

-- 
Russ Wolfe
'71 FB AT
'66 FB MT
'64 T34 (not running)
'65 T1 (not running)
'05 KIA Sorento SUV
russw@classicvw.org
http://www.classicvw.org

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~