[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
In a message dated 3/29/05 10:09:42 PM Eastern Standard Time,
DcHw65@comcast.net writes:
<< Me too mine is no not work i think problem with 6 volts and 12 volts . i
am not sure. >>
The sending units are all the same for type 3s. The guage itself is either 6
volt or 12 volt. If you're trying to use a 6 volt guage with 12 volts, then
you'll have problems. Once you pull the guage cluster out, turn it around and
see what voltage is stamped on the guage part. If it's wrong for your car, you
can remove the 2 screws and swap it out. I hope this helps.
Also if you don't mess up the gasket, you can reuse them, as they are some
sort of rubber.
Bob 65 Notch S w/ Sunroof
71 Square, now a 2 seat Roadster, pics can be seen at;
http://volksrods.com/forums/index.php?showtopic=2977
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~