[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
There were alot of True Crap lifters on the market about 15 years ago, perhaps you motor was built with these and once the cam is through the hardness layer it will grind down fast. Keith > Remember, to get it home, I had to back the locknut off as far as I dared > and then screw in the adjuster screw. With the rockers off, this #2 pushrod > goes much farther into the head than any of the other three pushrods do. > It's as if the camfollower shrunk by about 1/4". > > Daryl - 72SB ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~