Re: [T3] Head compatability

["ibjack" <proformance2@cox.net>]

<x-flowed>The # of teh one that I'm replacing is 311 101 375C.  It's the drivers side 
with the sensor mount.  Shaft mounts are square.  The heads were from a '69 
FI model.
----- Original Message ----- 
From: "Russ Wolfe" <russw@classicvw.org>
To: "Type3" <type3@vwtype3.org>
Sent: Monday, March 21, 2005 7:26 PM
Subject: Re: [T3] Head compatability


> On Mon, 2005-03-21 at 21:09, ibjack wrote:
> > So would it be best to replace both sides, so that they match?
> Yes, replace them in pairs. I am not sure what 311 heads you have tho.
> They could be earlies or lates. Need the whole casting number.
> Are the rocker shaft mounts square or round.
> Round mounts are the early, the Square mount is the late. They each take
> a different rocker shaft too.
>
> --
> Russ Wolfe
> '71 FB AT
> '66 FB MT
> '64 T34 (not running)
> '65 T1 (not running)
> '05 KIA Sorento SUV
> russw@classicvw.org
> http://www.classicvw.org
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>