[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 11 Mar 2005 at 23:36, Russ Wolfe wrote: > This is what I would prefer. > http://www.boltdepot.com/product.aspx?cc=15&cs=9&cm=19 > SS 8mmx1.25 > I have had good luck with these people. Looks like a nice site with good prices, but I prefer brass nuts here, and they don't seem to have them. It took awhile to find them, but McMaster-Carr carries them. As is usual for McMaster, they are more expensive but they have them Brass hex nuts M8 x 1.25 M-C part # 90690A055 $12.12/pack of 50 I have a supply of these if you just want to buy a smaller quantity. My prices are even higher, but I'll sell you only what you need. The stainless ones, also available from M-C, will be stronger, but this is not always an advantage. I prefer for the nut to strip, rather than the stud. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~