[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Thu, 2005-03-10 at 21:13, Dave Pallo wrote: > > Can anyone tell me exactly where to look for where this #23 wire comes > out?>...... > > Toby has a '72 and can probably tell you exactly where to look. It will > be somewhere in the harness in the area under the pressure sensor.> > Yeah, I agree Jim....probably located right about there....but I do not see > a extra wire in this area......There IS a white wire coming out of the > harness about 6 inches away from where the entire harness enters the engine > bay, but it was connected to a grounding spade terminal on the air > regulator.....maybe this isn't right?...... > right now I have every wire connected in the engine bay where I think it's > all supposed to be, and if I touch a continuity tester to this little white > wire (the one that is 6" in from the harness entrance), it tells me it's > already grounded (completes a circuit by providing a ground source)....so > I'm thinking this wire does indeed provide a ground for the air > regulator........ > I know Toby was messing with this same thing just a little while ago, but I > can't seem to get back to his thread on this in the archives.....Hey > Toby...are you out there?..... I just went out and looked at the harness on my '71. the head temp sensor wire comes out of the injection harness on the same branch as the three wire trigger point connector. About 3"-4" up the harness from the distributor. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~