[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 2 Mar 2005 at 23:37, Kevin Guarnotta wrote: > I guess I'm not being clear(that's what my friend always tells me too)... > > I can get all the bolts out of this thing...what I can't do is get the bolt > holes on the bumper bracket to align with the threaded nuts on the frame, at > the same time as the reinforcing bar holes are lined up with the holes on > the underside of the bumper. Sometime in the history of these > parts-something got bent... You can check and make sure that the 2 black plastic tubes that the reinforcing bar slides in are in place properly. They can get pushed thru the holes wrong and wedge the bar out of alignment. If that doesn't help, then somethings bent and I have no further advice to offer. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~