Re: [T3] Figuring out the pulley degree notches.

[Michael Cecil <macecil@comcast.net>]

<x-flowed>At 11:00 PM 6/22/2005, Toby Erkson said:
>Okay, got the Bentley and Idiot's Guide and I'm seeing some conflicting
>data.  Reading the notches from left to right, what degree should they
>represent i.e. 0¼, 5¼, etc.?  Remember, there are three notch and four
>notch pulleys -- my baby is four notches, the one next to my desk is
>three notches.
>
>Also, the bridge at the opposite end...does the center of it represent
>180¼?  My baby's pulley is the "bridged three teeth" but the pulley I
>have next to my desk has only two "bridged teeth" with a small pointer
>(or triangle) below it.
>
>Please, no "I think" or "I'm pretty sure" answers...just the facts!  :-)

If you don't know for certain that the pulley is 
correct, double check it yourself. 
http://www.dune-buggy.com/uploads/BuggyTalk/bbs122/DegreeWheel.pdf
--
Michael Cecil
macecil@comcast.net
http://home.comcast.net/~macecil/


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>