Re: [T3] Starter Question

[John Jaranson <jaransonT3@comcast.net>]

<x-flowed>
On Jun 3, 2005, at 11:57 PM, Dan Dypsky wrote:

> John Jaranson wrote:
>
> > I have the 12V starter from Jane.  It is for an automatic, so is self 
> > supporting.  I think all I need to do is pull the old 6V starter and 
> > bolt the automatic 12V starter in its place.  I think I remember that 
> > I am lucky in the fact that I have a 200mm flywheels so it does not 
> > need to be swapped.
> > Does this sound right?  What am I missing?
>
> John,
>
> If Sophy has a manual transmission, then I believe you will need to 
> remove the starter bushing from the transmission so the automatic 
> starter will bolt on.

Yeah, she is a manual.  I wasn't sure if that was necessary or not.  
Couldn't remember if the 6V or 12V was the larger diameter.  Anyone 
know for sure if I need to remove the starter bushing?

Later,
John Jaranson
'66 Square (Sophy)
'70 Fasty (Jane 2 - Type 3 Lead Sled wannabe)
'71 Fasty (Jane -parts car due to rust)
various parts.....don't we all.
http://mywebpages.comcast.net/jaransonT3/jaransonT3/
http://mywebpages.comcast.net/jaransonT3/2006Invasion/
http://mywebpages.comcast.net/jaransonT3/notavwclub/

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>