[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
After a closer look at my front end and a look in my handy-dandy Bentley T3 shop manual and found that no, I'm not missing any grease fittings. But it does look like I'm missing a plug. There's a nice threaded opening in the front of the bottom beam where I can see the stabilizer bar. Barring actually finding the proper plug or using duct tape, what's the best way to block this off?? Carrie 63 sunroof notch on a 70 pan 72 914 -----Original Message----- From: Everett Barnes [mailto:everettb@thesamba.com] Sent: Wednesday, June 01, 2005 7:47 AM To: type3@vwtype3.org Subject: Re: [T3] Painting Front Beam > Also, I have two grease nipples/fittings on the top side of the beam, > and a nice threaded hole in one spot on the lower. Am I missing a > grease fitting? > '66 owner's manual (for example): http://www.thesamba.com/vw/archives/manuals/manuals66.php Grease fittings: http://www.thesamba.com/vw/archives/manuals/66owners/34.jpg -- Everett Barnes http://www.thesamba.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~