[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 1 Jul 2005 at 9:04, J. Jonik wrote: > <jadney@vwtype3.org> wrote: > > Daniel has a good '71 switch (the one in the photo) > and I have a couple which could be repaired using > parts from your broken one. ...... > > That photo, unless I missed one, was of the kind > where ignition lock etc is part of same piece with > turn signal switch. My switch is just the lever, the > doughnut-shaped switch, and the wires going down in a > black wire holder, w/ 6 prong plug. You're looking at the right photo, but you're misinterpreting it somehow. What the photo shows is the complete steering column assembly, including the ignition lock, ignition switch, TS switch, and steering shaft bearing all in the housing that holds them all together in the car. The part you need, removes from this assembly with 4 screws, just as the one in your car did. I guess the problem was that the photo showed a larger assembly, but you didn't recognize it as being just like yours. All years incorporate an assembly something like this one, but this on is clearly a '71. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~