[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

RE: [T3] Oil problems


Thanks for the reply. It does run a little ruff. The enigine will cut in
and out like it isn't firing in that cylinder. What should I check
first?

-----Original Message-----
From: Jim Adney [mailto:jadney@vwtype3.org] 
Sent: Wednesday, January 05, 2005 5:28 PM
To: type3@vwtype3.org
Subject: Re: [T3] Oil problems


On 5 Jan 2005 at 16:03, Iturzaeta , Joseph wrote:

> My square smokes really bad. I changed the plugs and one of the plugs 
> had oil on it. I forgot the cylinder number, but it's the cylinder on 
> the right hand side at the tranny. What could be causing the oil to 
> get in the chamber? I can only think of the rings. Is there something 
> else that could be going wrong?

That's the # 3 cylinder.

The most likely thing is that there's something wrong with or at that
cylinder 
that's keeping it from firing. It could be as bad as a burned valve, or
as 
simple as a broken fuel injector wire.

How is the power and gas mileage?

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]