Re: [T3] exhaust system question

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] exhaust system question

To: type3@vwtype3.org
Subject: Re: [T3] exhaust system question
From: Toby Erkson <air_cooled_nut@pobox.com>
Date: Wed, 16 Feb 2005 21:28:43 -0800
In-reply-to: <4213BAA6.328.D4F271@localhost>
List-help: <mailto:type3-request@vwtype3.org?subject=help>
List-post: <mailto:type3@vwtype3.org>
List-subscribe: <mailto:type3-request@vwtype3.org?subject=subscribe>
List-unsubscribe: <mailto:type3-request@vwtype3.org?subject=unsubscribe>
Old-return-path: <air_cooled_nut@pobox.com>
References: <4213BAA6.328.D4F271@localhost>
Reply-to: type3@vwtype3.org
Resent-date: Wed, 16 Feb 2005 21:30:33 -0800 (PST)
Resent-from: type3@vwtype3.org
Resent-message-id: <S_oXcB.A.ffS.5vCFCB@cedant5.abac.com>
Resent-sender: type3-request@vwtype3.org
User-agent: Mozilla Thunderbird 1.0 (Windows/20041206)

<x-flowed>I recommend using fiberglass impregnated carb preheat hose instead. Will last the life of the header, even on bigger, faster spinning engines :-) I used the generic stuff at the FLAPS.

   Toby Erkson  --  air_cooled_nut@pobox.com
   Two '72 VW Squarebacks, '95 VW Jetta ~ WIP, '81 Gold Wing, '73 Porsche 914
   http://www.icbm.org/
   Portland, Oregon


Jim Adney wrote:

Aftermarket exhausts come with flimsy little flex tubes that run from the fan housing directly to the lower heat exchangers. These tubes eventually either fall off or abrade thru the side from rubbing on something.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]