[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 2 Feb 2005 at 8:31, Kevin Guarnotta wrote: > While doing some archive searching I remembered that one of my squirters > never squirted properly. I thin now might be a good time to remove it, and > try to clean it out(I've got the air handling unit out). I can't see this > thing from inside, but I can feel it. How does it come out? Do I just push > it out from underneath? There is a tab on one side that you have to press inward to get it to release. It's hard to describe and even harder to do without damage. I'd recommend that you just poke it with a sewing pin, alternating with squirting water, until it flushes clear. That's usually an easy fix. You can use the same pin to rotate the balls and aim the water jet. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~