[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] oil sensor part #


On Sun, 2005-08-28 at 15:34, Jim Adney wrote:

> 
> Are ALL(see the pictures in the Bentley manual) your bits of cooling tin in 
> place, and is the cooling air intake bellows in good shape? Is the thermostat 
> working and adjusted right?
> 
> If there is something wrong with the fuel system, you could be diluting the oil 
> with gas, which will thin it out. What's your gas mileage like? It should be 
> over 20 mpg. What year do you have and is it FI or carbs?
> 
> Or, maybe your sensor is just out on the edge of the bell curve.
> 
> Has this engine done this all the time you've had it? What grade of oil do you 
> use, and how often has it been changed? You could try switching to straight SAE 
> 30, but I don't recommend going thicker than that. Modern 10W-40 is fine, 
> however.
I would also add that you said your car sat outisde for a few years.
There is a VERY GOOD possiblity that you have mouse nests in the engine
cooling shrouds.

-- 
Russ Wolfe
'71 FB AT
'66 FB MT
'64 T34 (not running)
'65 T1 (not running)
'05 KIA Sorento SUV
russw@classicvw.org
http://www.classicvw.org

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]