Re: [T3] Distributor and breather box questions

["Brad Mularcik" <BnPWOODtype3@att.net>]

<x-flowed>HAl,
   Thanks for the input, but my T3 motor is in a Manx style dune buggy. 
Plenty of room.  Just to be sure, I bought the option for manifolds that 
were 1" shorter than normal.
Brad Mularcik

----- Original Message ----- 
From: "Hal Sullivan" <tristessa@frys.com>
To: <type3@vwtype3.org>
Cc: <type3@vwtype3.org>
Sent: Tuesday, April 26, 2005 1:37 AM
Subject: Re: [T3] Distributor and breather box questions


> At 08:28 PM 4/25/05, Brad Mularcik wrote:
> > Back on my distributor, I am buying dual Kadron carbs from a place called 
> > AJ Simms at Low Budget.com. http://lowbugget.com/Kadron_carb_page.html
>
> I hope you like the idea of "humps" into the rear trunk/cargo area --  
> Kadrons are too tall
> to fit under the lid on a T3.  The carb alone is almost as tall as a Weber 
> ICT + Manifold..
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>