[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 30 Sep 2004 at 10:15, fess wrote: > It seems my '67 has also had it's axles shortened. [ so, that axle > tube and retainer plate I was looking for was not quite > the right thing. ] The end casting has been pressed off the axle > tube, and one from an early model type 1 has been pressed on. > > In order to decipher what exactly I have now, and what I might need to > have, I need a list of part numbers. 311 501 163A & 311 501 164A are the L & R bearing housings for all swing axle type 3s from '64 on. It looks like the cover (113 501 3311A) might have changed in minor ways, and that the little spacer sleeve (113 501 303B) may have changed at the same time. What makes you think the axles have been shortened? Any idea why this would have been done? Are you looking for a complete '67 tranny/rear axle assy with brakes? That's looking like the best solution. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~