[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I didnt forget you Jim. I was rebuilding the carb today. I did get the old seals out of the cooler that are the same as the case. I thought these were the common ones you get in the packs, but they are NOT. Look close and you will see a taper. In the pic the originals are in the lower right. I did find these two, lower left and new identicle ones. In the background are the tube type found in the packs. I dont have any calipers to measure for you Jim. http://images.andale.com/f2/115/106/2789089/1096627983033_gulf_62_007.jpg jason > On Tue, 2004-09-28 at 21:05, Russ Wolfe wrote: > > > > > > > > > I don't have your experience with those. The gasket sets I get always have > > > about 4 different varieties of straight tubular seals of various colors, > > > lengths, IDs and ODs. I assume one of these is correct, but which one? > > > > The smaller straight tubular ones. Dang, there are some laying on the > > bench in the shop and I just came in from taking pictures. > > Give me a few minutes and I will have a picture up. > > Picture is up. > http://classicvw.org/gallery/Ghia-Progress/IMG_0006_002 > Read the comment. > > -- > Russ Wolfe > '71 FB AT > '66 FB MT > '64 T34 (not running) > '65 T1 (not running) > russw@classicvw.org > http://www.classicvw.org > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >