[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Wed, 2004-09-22 at 18:54, BOB2TYPE3S@aol.com wrote: > Gary wrote: > >This will work here in Mass, since I put the car away in mid-November > >and bring it out again in April. > > If you decide to go this route, make sure you paint them with some good > paint. If not they will rust thru. I had a set like you're talking about on my > Notch, but when I swapped over to the stock exhaust, I went back to the wrapped > HE's (my old ones had flanges for the header). Just something to think about. > Also, if you re wrap them, don't forget to reuse the metal rock shields that they came from the factory with. It helps greatly with the longevity of the outer insulation. BTW, T-1's never came with the outer insulation. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~