[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sun, 2004-09-05 at 15:20, Jim Adney wrote: > > > At Hershey we took John J's engine out to replace a clutch disk. We had all > the tools and jacks that we needed plus a virtually unlimited pool of eager > labor. I think it still took us nearly 4 hours to do that job. This was on a > swing axle carbed car with the heaters attached. It goes faster if the heater > hoses are not there. Flat rate in the shop to R & R (remove and replace), a T-3 engine is 1.75 hours. Add .5 hours to replace the clutch. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~ Shameless link for search engines: http://listarchive.type3.org ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~