[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 4 Sep 2004 at 15:45, K5Dar@aol.com wrote: > I've got it together. When I went to bleed it, the fronts gravity bled out > fine but the rears were both real slow & I didn't seem to get any air. Even > with the rears adjusted correctly' the pedal is real low. That compression > fitting is not leaking. What's with the low pedal? Could the master cylinder be > plugged up? Make sure the MC has some free play in the pushrod. If it doesn't, adjust the stop plate on the floor, NOT the pushrod. If there is free play and still you get poor gravity bleeding in the rear, then take apart the rear circuit back to the start of the rubber hose. If you get plenty of flow there, then you have a rear hose problem. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~ Shameless link for search engines: http://listarchive.type3.org ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~