[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sat, 2004-10-23 at 13:40, knowonelse wrote: > When re-assembling the '67 engine today, I came across > a second piece of upper front tin. The previous message > concerning the fuel line through hole pertains to the > black tin. When I installed the blue one, the fuel hole > is much higher and in a reasonable location. I'll still > stick with the body hole bulkhead location however. > > http://thesamba.com/vw/forum/album_search.php?search_author=Jeff67sqbk > > The '68+ Bentley shows the one in blue, with the vent > hole in the left side. > > What years is the black one intended for? I think it is for an early carbed engine. there was an "L" shaped piece of metal line that went through that hole with a rubber grommet. The fuel line then went over to the linkage pivot and to the pump. From what I can see in the picture, it looks like my '64 Ghia tin. > > Jeff '67 Sqbk > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) russw@classicvw.org http://www.classicvw.org