[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] 62 gulf blue redo


Which one? All of them are available from ISPWest.

jason

----- Original Message ----- 
From: "T JENKINS" <coopertwpk@msn.com>
To: <type3@vwtype3.org>
Sent: Saturday, October 09, 2004 6:28 PM
Subject: Re: [T3] 62 gulf blue redo


> where did you get the sticker? Thanks Tracy
>
>
> ----- Original Message ----- 
> From: "Jason Weigel" <notchboy@comcast.net>
> To: <type3@vwtype3.org>
> Sent: Monday, October 04, 2004 2:56 PM
> Subject: Re: [T3] 62 gulf blue redo
>
>
> > To be totally anal correct: The tin is satin black, not gloss like
mine(I
> > like gloss!), the fan housing is Aluminum cast natural( I just sprayed
> > lacquer on mine to preserve it after blasting) same for the fan. The
case
> > is
> > natural and I don't recommend doing anything to it other than cleaning,
> > the
> > manifold, elbows, exhaust are supposed to be zinc coat flat from the
> > factory( I left the cast part on the manifold natural and painted the
> > tubes
> > grey then coated it all with lacquer). The exhaust is NOS so I wont have
> > to
> > do anything to it. The cherry ontop is stickers, small paint marks(like
on
> > the fan when you look down the hole, and the line-up hole on genny
strap)
> > that really set the motor off. On the coil and cleaner after paint coat,
I
> > put the sticker on then coat with lacquer to protect it. I have found
that
> > the prints on stickers don't hold well to solvents and such!
> >
> > before
> > http://www.thesamba.com/vw/gallery/pix/174969.jpg
> > after
> > http://www.thesamba.com/vw/gallery/pix/174970.jpg
> >
> > Hope this helps
> >
> > jason
> >
> >
> > > >
> >
http://www.thesamba.com/vw/forum/album_search.php?search_keywords=62+gulf+blue+notch+resto&search_terms=all
> > >
> > > Jason,
> > >
> > > Do you have paint codes & details for which parts are which colours ?
> > > Or was it just a case of saying 'these bits are black, and these bits
> > > are
> > grey'?
> > >
> > > I will be doing an engine rebuild one day, and want to get all my bits
&
> > bobs redone like yours. I hope they will look as nice as yours do!
> > >
> > > Thanks,
> > >
> > > Matthew
> >
> >
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> >
>



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]