[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 8 Oct 2004 at 13:10, Petri O. Calderon Larjanko wrote: > The question is: in case I have to buy a new cable, what is the part number > for my RHD 71 Notch? Is it interchangeable with a T1 or are they different > lengths? I don't know the part # off hand, but it is a uniquely type 3 part. I have them in stock if you can't find one locally. > Also, I grabbed some steps for changing the clutch cable in a T1, would > these differ a lot to change the cable on a T3? The steps are pretty much the same: 1) Disconnect and remove everything at the rear: wing nut & Bowden (flex) tube. 2) Disconnect and remove the MC pushrod (don't change it's length adjustment.) 3) Remove the pedal cluster and pull out the old cable. 4) Feed in the new cable while smearing it with lots of grease. 5) Reinstall everything in the reverse order, being careful not to let the clutch pedal fall backwards, which would let the clutch cable fall off the inner hook. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~