[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] F.I. troubleshooting


**************************************************
> Have you checked the trigger points in the distributor? Mine was running
> fine then just died...... changed the trigger points and it started right
up
> and ran great...... drove 100 miles, and they went out again! Changed them
> again and they have worked great ever since. I have part numbers if you
need
> them.
>
> Dean
> 70 AT FI Squareback
> Salt Lake City

I took the distributor apart and looked at the points, and they looked all
right. I've already pulled the engine out of the donor car and switched all
the F.I. from the '73 system to the '70 system to match the car that the
engine is going into, including the '70 distributor. I know that the old
engine in the '70 ran, so I'm not anticipating any problems getting it up
and running. Thanks everyone for the good troubleshooting advice, hopefully
my next post will be "It's running".


Terry Cost
'70 and '73 squares
Austin, TX

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]