[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-flowed> On Nov 12, 2004, at 7:28 PM, Matt Sanderson wrote:
Hey
The carrera cup wheels width is around 7-9 inches, i think. yea i want to keep the lines from the factory, if that possible. i was thinking of getting the adapter from 4 bolt to the porsche 5 bolt pattern.
it is better to get wheels with an et of 52 and space them out towards the wheel arch lips as much as you can typ3 cars originally came with wheels of 45 etWhat do you mean by this?
For what it is worth, I am running 15x7 wheels with 195/55R15 rubber on the front of Sophy and 16X7 wheels with 205/55R16 rubber in the back. The wheels have a 42mm offset and I had the drums and rotors redrilled for the proper (4x100mm) bolt pattern. I also had studs pressed in so I could use standard lugnuts. I had to bulge the rear fender out just a little bit to get clearance for the rubber and I trimmed the pad for the bumpstop to get a little breathing room on the inside. Up front, I only rub the inner wheel well at full lock.
http://mywebpages.comcast.net/jaransonT3/SophyRebuild.html
HTH.
Later, John Jaranson '66 Square (Sophy) '71 Fasty (Jane - darkside project in waiting) various parts.....don't we all. http://mywebpages.comcast.net/jaransonT3/jaransonT3/ http://mywebpages.comcast.net/jaransonT3/2004Invasion/ http://mywebpages.comcast.net/jaransonT3/notavwclub/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~