[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 29 May 2004, at 11:20, Kevin Guarnotta wrote: > I have a small leak at the FI computer unit thingy...The gasket is > there and in decent shape, and it is seated properly(I had to adjust > that). Are you SURE that teh spring clips are properly clipped over the sheet metal so that they are on the outside of the body? I've never seen a problem with these unless the clips weren't seated right. And I've seen a LOT with the clips just dangling free in the INSIDE of the body. > But it still has a trickle leak. Any suggestions? I was a little > worried about using any type of sealant-in case I ever need to get to > the computer unit-but then again if I need to get there I could just > break that seal, clean it up and re-seal. What do you guys use to seal > this thing.... You could use some gasket compound if you really have to, but keep in mind that I have NEVER seen this to be necessary if the parts are all put back together right. > Is there a hole like this on the passenger side too? No. - Jim Adney Madison, WI USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org